Friday, March 28, 2014

His & Hers

His & Hers

What you will need:
1. White and blue spray paint
2. brown craft paint
3. large paint brush used for crafts 
4. his & hers cut out from 

Step 1:
Paint the His, hers blue and the & symbol white 

Step 2:
Next mix water with brown paint and use a paint brush to paint it to the his & hers. 

Step 3:
Use a paper towel to wipe off the watered down paint
and it will leave a distressed look. 

Let dry and you are finished!


Monday, March 24, 2014

Pineapple Door Hanger

Door Hanger

 What you will need:
                                                1. Pineapple, from
                                                2. 5" 3 letter monogram
                                                3. pink spray paint
                                                4. green, white, pink, and light pink craft paint
                                                5. lg. and small paint brush

 Step 1:
Paint the bottom of the pineapple pink.

  Step 2:
 Paint and orange oval in the center of the pineapple, may take several coats. 

  Step 3:

 Paint light pink criss cross lines.  

 Step 5:
Next paint the top of the pineapple lime green. 

 Step 6:
Next, add white to the lime green and paint lighter polka dots on the green leaves.  Paint the polka dots by twisting the brush in a circular motion.

 Step 7:
Highlight the pink lines with a lighter pink. 

 Step 8:
Staple a green burlap to the back for hanging. 

Friday, March 21, 2014

Baby Squirrel Cross

Oh So Adorable
Squirrel Cross!

Perfect for little boy's room.
In this project I used a combination of paint and craft paper
to achieve this super cute look! 
Have fun and great creative!

What You Will Need:
4. Craft paper
5. Tan and turquoise spray paint
6. Black and green spray paint, (I used forest green)
7. Sponge brush
8. Bristle brush 

Step 1:
Paint the sides of the largest cross a dark green.
(Tip: If you don't have dark green just use a light green and black)

Step 2:
Spray paint the smallest cross turquoise.

Step 3:
Spray paint the squirrel tan.

Step 4:
Distress the squirrel with the bristle brush and black paint.

Step 5:
With the bristle brush, use black paint to highlight the edges of the cross.  Just lightly brush the sides. 

Step 6:

Spray 3M spray adhesive all over the cross 
and allow to sit for 10 seconds. 

Step 7:
Then put the paper on the cross.

Step 8:
Then use an X acto knife to trace around the cross and remove excess paper. 

Step 9:
Then use E6000 and hot glue to attach the pieces.  
(Note: Hot glue acts as a temporary hold while the E6000 dries.)